T
o
p


Balboa 55264 Circuit Board VS612R1(x) Alt Replace, NoBlwr, Beachcomber

Balboa 55264 Circuit Board VS612R1(x) Alt Replace, NoBlwr, Beachcomber
  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: 55264
  • Chip Number: VS612R1(x)


Call for Price

Item Number: 22-4436

  • Description
  • Details
  • Reviews

The Balboa 55264 VS612R1(x) circuit board is discontinued but we have options.

Option 1: Get your circuit board repaired.  Please contact us before sending items in for repair.

Option 2: Contact us to inquire about a new retro-fit system control box replacement.

The Balboa 55264 VS612R1(x) circuit boards are also found in hot tubs made by Beachcomber Hot Tubs and possibly others.
Cross Reference Verification
Serial Numbers:
  • 55264
  • BAL55264
  • 55264-01

Chip Numbers:
  • VS612R1A
  • VS612R1B
  • VS612R1C
  • VS612R1D
  • VS612R1E
  • VS612R1F
Additional Cross Ref., Compatibility & Installation
ATTENTION: This replacement circuit board does NOT support an electric air blower.
Tip: An electric air blower is not the same as an air valve.
Tip: An electric air blower is not a jet pump.
System Control Box Serial Numbers
Tip: The system control box is usually located below the hot tub and the circuit board mounts inside of it.

The Balboa 55264 VS612R1(x) circuit board can be found in the following hot tub system control boxes (but not limited to).

System Control Box Serial Numbers:
  • 55263
  • 55263-01
Tip: When replacing a hot tub circuit board, testing the heater and replacing it (if bad), is recommended before installing or applying voltage on a new circuit board.
Note: A continuity test is not a sufficient heater test. Contact us by phone for more details on testing a heater.
See RELATED PRODUCTS below for heater replacements.

Tip: Burned circuit boards or burned heater relays are often due to a loose electrical connection or a bad heater or both.
If all connections are tight and if the heater is good then the heater relays are probably old and worn out.
If a burned relay was powering a pump and all electrical connections are tight then the relay is probably old and worn out or the pump might be bad or going bad or all three.
Replacing the heater and/or pump with a new one is recommended if any of those scenarios apply.

Tip: Items shown in RELATED PRODUCTS below have also been found in hot tub systems with Balboa 55264 VS612R1(x) circuit boards.

Unsure of what something on this page means?

Please contact us so we can better assist you.


  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: 55264
  • Part Number: VS612R1(x)
  • Item Number: 22-4436


Be the first to write a review.  Write a Review.