Balboa 52498 Circuit Board HS200R1(x) Alt Replacement, Hydro Spa

Balboa 52498 Circuit Board HS200R1(x) Alt Replacement, Hydro Spa
  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: 52498
  • Chip Number: HS200R1(x)

Call for Price

Item Number: 22-8063

  • Description
  • Details
  • Reviews

The Balboa 52498 HS200R1(x) circuit board is discontinued but we have options.

Option 1: Get your circuit board repaired.  Please contact us before sending items in for repair.

Option 2: Contact us to inquire about a new retro-fit system control box replacement.

The Balboa 52498 HS200R1(x) circuit boards are also found in hot tubs made by Hydro Spa and possibly others.
Cross Reference Verification
Serial Numbers:
  • 52498
  • BAL52498
  • 52498-01

Chip Numbers:
  • HS200R1A
  • HS200R1B
  • HS200R1C
  • HS200R1D
  • HS200R1E
  • HS200R1F
Additional Cross Ref., Compatibility & Installation
ATTENTION: Some of the HS200 hot tub systems have an auxilary topside control panel (which is an additional keypad, but it is not the main keypad) and it is not supported with this alternate replacement circuit board.

Everything else is supported.
System Control Box Serial Numbers
Tip: The system control box is usually located below the hot tub and the circuit board mounts inside of it.

The Balboa 52498 HS200R1(x) circuit board can be found in the following hot tub system control boxes (but not limited to).

System Control Box Serial Numbers:
  • 52497-01
  • 52497-02
  • 52497-03
  • 52497-04
  • DU-HS200-DCAJ
Tip: When replacing a hot tub circuit board, testing the heater and replacing it (if bad), is recommended before installing or applying voltage on a new circuit board.
Note: A continuity test is not a sufficient heater test. Contact us by phone for more details on testing a heater.
See RELATED PRODUCTS below for heater replacements.

Tip: Burned circuit boards or burned heater relays are often due to a loose electrical connection or a bad heater or both.
If all connections are tight and if the heater is good then the heater relays are probably old and worn out.
If a burned relay was powering a pump and all electrical connections are tight then the relay is probably old and worn out or the pump might be bad or going bad or all three.
Replacing the heater and/or pump with a new one is recommended if any of those scenarios apply.

Tip: Items shown in RELATED PRODUCTS below have also been found in hot tub systems with Balboa 52498 HS200R1(x) circuit boards.

Unsure of what something on this page means?

Please contact us so we can better assist you.

  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: 52498
  • Part Number: HS200R1(x)
  • Item Number: 22-8063

Be the first to write a review.  Write a Review.