The Therm Products C2550-3661-TI heater assembly is a generic replacement designed to work with the Watkins IQ2020 control box only.
This heater assembly has a titanium element, 316L stainless steel housing, 48" power cord and a push button reset high-limit switch fix to trip at 130°F.
This package includes a section of 3/4" tubing, 4 clamps and a 3/4" barbed coupling to facilitate retro-fit.
Please Note: Length of tubing necessary will vary by model of tub.
ATTENTION: This heater does not use a pressure switch (no flow switch).
ATTENTION: It will be necessary to plug/stop the positive drain line that attached to the OEM heater.
ATTENTION: 6-8 gpm minimum flow rate required.
ATTENTIION: These sensors connect directly into the circuit board.
Not the side of the control box.
If your sensors connect into the side of the IQ2020 control box then you need the Watkins 73790 heater or the Therm Products C3160-1 heater or the HydroQuip 26-C3160-1S heater.
All shown below in "Related Products".
The Therm Products C2550-3661-TI (Titanium 6.0KW) low-flow heater assembly has the following features and specifications.
Series: No Fault 6000, IQ2020, Aftermarket, Wiith Sensors (but not limited to, unless specified otherwise above).
Element Grade: Titanium
Kilowatt Rating: 6.0KW / 1.5KW
Voltage Rating: 240V / 120V
Temperature Sensor Included: Yes
Hi-Limit Sensor Included: Yes
Tail Pieces Included: Yes (removable)
Tail Piece Size: 2-1/4"mbt x 3/4"b, 90 deg (removable)
About Us