Hydro-Quip 26-0011-5S-K Heater, 4.0KW, Cal Spa, XL 4.0, Aftermarket

The Hydro Quip 26-0011-5S-K (4.0KW) heater assembly is an aftermarket replacement for Cal Spa OEM XL (4.0KW) heat exchangers.
It has two thermo grooves (with cover), a pressure switch tap and an aluminum metal box.
Pressure switch nd sensros are not included.

This is not a heat exchanger (the old inefficient technology with the element wrapping around the outside).

This is an aftermarket replacement using a newer design having a wet element in an inline flo-thru drop-in replacement (better efficiency).

This replacement may come with two additional wires with male and female terminal ends that are usually not utilized.
If your system normally doesn't use the additional wires, it is ok to conect them together, otherwise connect them they way your system noramlly uses them.

The heating element is a (4.0KW) standard element (not titanium).
With proper water chemical balance, standard elements can last a very long time.



The Hydro-Quip 26-0011-5S-K flo-thru heater assembly has the following features and specifications.

Series: XL 4.0, Aftermarket (but not limited to, unless specified otherwise above).
Manifold Length: 15"
Manifold Diameter: 2"
Stainless Steel: Yes
Heating Element Included: Yes
Kilowatt Rating: 4.0KW / 1.0KW
Voltage Rating: 240V / 120V
Clip for Sensor: Yes
Temperature Sensor Included: No
Hi-Limit Sensor Included: No
Pressure Switch Included (A.K.A. Flow Switch): No
Number of Threaded Taps: 1
Threaded Tap Location(s): Pressure switch tap 6 O'Clock.
Tail Pieces Included: Yes (removable)
Tail Piece Size: 2" x 2" (removable)