T
o
p


Balboa MAS260R1(x) Circuit Board Alt Replacement, Master Spas

Balboa MAS260R1(x) Circuit Board Alt Replacement, Master Spas
  • Manufactured by: Balboa Water Group, Inc.
  • Chip Number: MAS260R1(x)

$335.08



Item Number: 22-2515

  • Description
  • Details
  • Reviews
Please read entire page before placing an order.

This money saving alternate replacement circuit board is for replacing Balboa circuit boards having a MAS260R1(x) chip number.

The Balboa MAS260R1(x) circuit boards are also found in hot tubs made by Master Spas, Inc. and possibly others.

Tip: The "(x)" shown above is shorthand for a range of last letters on MAS260R1 chip numbers this alternate replacement circuit board can replace.

Please note: A list of chip numbers this alternate replacement circuit board can replace is specified in the CROSS REFERENCE VERIFICATION section below.

Please note: This alternate replacement circuit board is made by the same manufacturer, it is brand new, it is compatible with your system (unless specified otherwise in the ADDITIONAL CROSS REF., COMPATIBILITY & INSTALLATION section below), it has the same quality and durability.

Please note: This alternate repalcement circuit board will have different numbers.
Cross Reference Verification
Tip: Locate the chip number on the circuit board you are replacing.
Tip: The whole chip number is on a sticker located on the circuit board (not the box).
Tip: The chip number sticker usually has two lines of text and the top line is the whole chip number (the bottom line is not needed).
Tip: See image above for an example of a chip number sticker and where they're typically found on the circuit board (click the image to enlarge it).

Verify the chip number on the circuit board being replaced placed is in this list.

Chip Numbers:
  • MAS260R1A
  • MAS260R1B
  • MAS260R1C
  • MAS260R1D
  • MAS260R1E
  • MAS260R1F
Additional Cross Ref., Compatibility & Installation
ATTENTION: This replacement circuit board does not support a circulation pump.
Tip: a jet pump is not a circulation pump.

You must verify that your hot tub system does not have a circulation pump before placing this order.

If your hot tub system does have a circulator pump; please give us a call so we can help you find the correct circuit board.
Tip: When replacing a hot tub circuit board, testing the heater and replacing it (if bad), is recommended before installing or applying voltage on a new circuit board.
Note: A continuity test is not a sufficient heater test. Contact us by phone for more details on testing a heater.

Tip: Burned circuit boards or burned heater relays are often due to a loose electrical connection or a bad heater or both.
If all connections are tight and if the heater is good then the heater relays are probably old and worn out.
If a burned relay was powering a pump and all electrical connections are tight then the relay is probably old and worn out or the pump might be bad or going bad or all three.
Replacing the heater and/or pump with a new one is recommended if any of those scenarios apply.

Tip: Items shown in RELATED PRODUCTS below have also been found in hot tub systems with Balboa MAS260R1(x) circuit boards.

Unsure of what something on this page means?

Please contact us so we can better assist you.


  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: MAS260R1(x)
  • Item Number: 22-2515


Be the first to write a review.  Write a Review.