Balboa 51287 Circuit Board 9100CPR1(x) Alt Repl, Caldera, Watkins

Balboa 51287 Circuit Board 9100CPR1(x) Alt Repl, Caldera, Watkins
  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: 51287
  • Chip Number: 9100CPR1(x)

Call for Price

Item Number: 22-7837

  • Description
  • Details
  • Reviews

The Balboa 51287 9100CPR1(x) circuit board is discontinued but we have options.

Option 1: Scroll down to RELATED PRODUCTS for other replacement options.

Option 2: Get your circuit board repaired.  Please contact us before sending items in for repair.

Option 3: Contact us to inquire about a new retro-fit system control box replacement.

The Balboa 51287 9100CPR1(x) circuit boards are also found in hot tubs made by Caldera Spas, Watkins Manufacturing Corp. and possibly others.
Cross Reference Verification
Serial Numbers:
  • 51287
  • BAL51287

Chip Numbers:
  • 9100CPR1A
  • 9100CPR1B
  • 9100CPR1C
  • 9100CPR1D
  • 9100CPR1E
  • 9100CPR1F
Additional Cross Ref., Compatibility & Installation
Changes in functionality:
Auxilary control panels are not supported by this replacement circuit board.
Some of these hot tub systems have an additional topside control panel (with usually 1 or 2 buttons) and they are no longer supported.

If you have an auxilary topside control panel, please contact us before placing an order and inquire about replacement availability.
Tip: When replacing a hot tub circuit board, testing the heater and replacing it (if bad), is recommended before installing or applying voltage on a new circuit board.
Note: A continuity test is not a sufficient heater test. Contact us by phone for more details on testing a heater.

Tip: Burned circuit boards or burned heater relays are often due to a loose electrical connection or a bad heater or both.
If all connections are tight and if the heater is good then the heater relays are probably old and worn out.
If a burned relay was powering a pump and all electrical connections are tight then the relay is probably old and worn out or the pump might be bad or going bad or all three.
Replacing the heater and/or pump with a new one is recommended if any of those scenarios apply.

Tip: See RELATED PRODUCTS below for more Balboa 51287 9100CPR1(x) replacement options.

Unsure of what something on this page means?

Please contact us so we can better assist you.

  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: 51287
  • Part Number: 9100CPR1(x)
  • Item Number: 22-7837

Be the first to write a review.  Write a Review.

Related Products

(Items shown here are sold separately.)