T
o
p


Balboa 51257 Circuit Board B240DGR1(x) Alt Replacement 2, Streamline

Balboa 51257 Circuit Board B240DGR1(x) Alt Replacement 2, Streamline
  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: 51257
  • Chip Number: B240DGR1(x)


Call for Price

Item Number: 22-3437

  • Description
  • Details
  • Reviews

The Balboa 51257 B240DGR1(x) circuit board is discontinued but we have options.

Option 1: Scroll down to RELATED PRODUCTS for other replacement options.

Option 2: Get your circuit board repaired.  Please contact us before sending items in for repair.

Option 3: Contact us to inquire about a new retro-fit system control box replacement.

The Balboa 51257 B240DGR1(x) circuit boards are also found in hot tubs made by Streamline Spas and possibly others.
Cross Reference Verification
Serial Numbers:
  • 51257
  • BAL51257

Chip Numbers:
  • B240DGR1A
  • B240DGR1B
  • B240DGR1C
  • B240DGR1D
  • B240DGR1E
  • B240DGR1F
Additional Cross Ref., Compatibility & Installation
ATTENTION: Most of these hot tub systems have 2 Jet Pumps, an Ozonator and a single speed air blower and this alternate replacement circuit board fuly supports.

However, a few systems have a multiple speed air blower:
Keep in mind, an air blower is not a jet pump.
If the system has a multi-speed air blower, it will now operate on one speed.

There is no change for a single speed air blower.

ATTENTION: systems with 3 or more pumps are not supported.
If the hot tub system has more than 2 pumps, please contact us for another replacement option.
Tip: When replacing a hot tub circuit board, testing the heater and replacing it (if bad), is recommended before installing or applying voltage on a new circuit board.
Note: A continuity test is not a sufficient heater test. Contact us by phone for more details on testing a heater.

Tip: Burned circuit boards or burned heater relays are often due to a loose electrical connection or a bad heater or both.
If all connections are tight and if the heater is good then the heater relays are probably old and worn out.
If a burned relay was powering a pump and all electrical connections are tight then the relay is probably old and worn out or the pump might be bad or going bad or all three.
Replacing the heater and/or pump with a new one is recommended if any of those scenarios apply.

Tip: See RELATED PRODUCTS below for more Balboa 51257 B240DGR1(x) replacement options.

Unsure of what something on this page means?

Please contact us so we can better assist you.


  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: 51257
  • Part Number: B240DGR1(x)
  • Item Number: 22-3437


Be the first to write a review.  Write a Review.

Related Products

(Items shown here are sold separately.)