Customer Service
1-828-781-1903


Saratoga Spas 52362 Circuit Board, SAR200R3(x), Alt Replacement


  • Part Number: 52362
  • Chip Number: SAR200R3(x)
  • Manufactured by: Saratoga Spas

$275.41

Add to Cart:

Item Number: 22-3782

Click For All Replacements

  • Description
  • Details
  • Reviews
Please read entire page before placing an order.

This money saving alternate replacement is for replacing Saratoga Spas 52362 circuit boards having a SAR200R3(x) chip number.
Tip: (x) = the last letter of your chip number.

This alternate circuit board will have a different serial number and a different chip number.
If you want to spend more money for a circuit board with the same number, you will need to click on the button (above) for all replacements too see if the original is stocked.
This alternate replacement is made by the same manufacturer with the same durability and quality.
This alternate replacement has been verified as a working replacement.
See below for feature changes or feature loss (if any).
See below for install instructions (if any are needed).
Cross Reference Verification
Step 1 of 2:
Make sure your circuit board's serial number is in this list.
Tip: The circuit board's serial number is on a sticker on the circuit board (this is not the box's number).
Tip: Only the first five digits are need to verify the serial number.
Tip: Sometimes the serial number is shown as P/N (part number).
Tip: The image above shows an example of a serial number sticker.

Serial Numbers:
  • 52362
  • BAL52362
Step 2 of 2:
Make sure your circuit board's chip number is in this list.
Tip: The whole chip number is on a sticker located on the circuit board.
Tip: This is a different sticker than the serial number sticker.
Tip: The image above shows an example of a chip number sticker.

Chip Numbers:
  • SAR200R3A
  • SAR200R3B
  • SAR200R3C
  • SAR200R3D
  • SAR200R3E
  • SAR200R3F
  • SAR200
  • SAR200R3
  • SAR200R3(x)
Additional Cross Ref., Compatibility & Installation
ATTENTION: Jet pump 1 and jet pump 2 become single speed pumps if the system also has a circulation pump.
If the system does not have a circulation pump then jet pump 1 can operate two speeds and jet pump 2 operates with one speed.

If the system has an electric air blower, it will operate on one speed.

This replacement also supports an ozonator and a spa light (standard light or fiber optic).


Circuit Boatd Jumper Pin Set Up:

For systems with a circulation pump, set jumper J6 with the sleeve covering both pins.

For systems with ONE jet pump, set jumper J10 on both pins.
For systems with TWO jet pumps&344; set jumper J10 on one pin (doesn't matter which pin).

Jumper J7 (this is a 3 pin jumper):
For 6-Button control panels: Set sleeve on two pins of side 'B'
For 7-Button control panels: Set sleeve on two pins of side 'B'
For 8-Button control panels: Set sleeve on two pins of side 'A'


For a standard spa light, set jumper J17 on one pin (doesn't matter which pin).
For a fiber optic spa light, set jumper J17 on both pins.


When changing the above settings it is best to reset the battery back up.

Battery back up reset instructions:
Turn power OFF.
Set jumper J36 sleeve on both pins.
Turn power ON.
Wait 30 seconds.
Turn power OFF.
Wait 30 seconds again.
Put jumper J36 sleeve on one pin.
Turn power ON.
Battery back up has now been reset.

If you completed the instructions above and the topside control panel doesn't function, then it should be replaced because it is defective too.

Please give us a call if you need a new topside control panel.
We are here to help!
Other Replacement Options
For all cross reference replacements of this circuit board:

Click Here

Or contact us if you need help finding or selecting parts.

  • Part Number: 52362
  • Chip Number: SAR200R3(x)

  • Manufactured by: Saratoga Spas
  • Item Number: 22-3782


Be the first to write a review.  Write a Review.