T
o
p


Balboa 52163 Circuit Board D3000R2(x) Alt Repl, Dynasty Spas 10133

Balboa 52163 Circuit Board D3000R2(x) Alt Repl, Dynasty Spas 10133
Balboa 52163 Circuit Board D3000R2(x) Alt Repl, Dynasty Spas 10133
Balboa 52163 Circuit Board D3000R2(x) Alt Repl, Dynasty Spas 10133
Balboa 52163 Circuit Board D3000R2(x) Alt Repl, Dynasty Spas 10133

  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: 52163
  • Chip Number: D3000R2(x)

 Sold Out 
Item Number: 22-5882

  • Description
  • Details
  • Reviews

The Balboa 52163 D3000R2(x) circuit board is discontinued but we have options.

Option 1: Get your circuit board repaired.  Please contact us before sending items in for repair.

Option 2: Contact us to inquire about a new retro-fit system control box replacement.

The Balboa 52163 D3000R2(x) circuit boards are also found in hot tubs made by Dynasty Spas under the part number 10133.
Cross Reference Verification
Serial Numbers:
  • 52163
  • BAL52163

Chip Numbers:
  • D3000R2A
  • D3000R2B
  • D3000R2C
  • D3000R2D
  • D3000R2E
  • D3000R2F
Additional Cross Ref., Compatibility & Installation
This package deal includes an alternate replacement circuit board and a compatible topside control panel.
The old (original) topside control panel is outdated and not compatible.

ATTENTION: Some of these hot tub systems have an optional auxiliary topside control panel that is also outdated and not compatible with this alternate replacement circuit board.
If you have an optional auxiliary topside control panel, please contact us to inquire if a compatible one is available.
System Control Box Serial Numbers
Tip: The system control box is usually located below the hot tub and the circuit board mounts inside of it.

The Balboa 52163 D3000R2(x) circuit board can be found in the following hot tub system control boxes (but not limited to).

System Control Box Serial Numbers:
  • 10254
  • 51582-01
  • 51582-02
  • 51582-03
  • 51582-04
  • 51582-05. 51582-06
  • 51582-07
  • 51582-08
  • 51582-09
Tip: When replacing a hot tub circuit board, testing the heater and replacing it (if bad), is recommended before installing or applying voltage on a new circuit board.
Note: A continuity test is not a sufficient heater test. Contact us by phone for more details on testing a heater.
See RELATED PRODUCTS below for heater replacements.

Tip: Burned circuit boards or burned heater relays are often due to a loose electrical connection or a bad heater or both.
If all connections are tight and if the heater is good then the heater relays are probably old and worn out.
If a burned relay was powering a pump and all electrical connections are tight then the relay is probably old and worn out or the pump might be bad or going bad or all three.
Replacing the heater and/or pump with a new one is recommended if any of those scenarios apply.

Tip: Items shown in RELATED PRODUCTS below have also been found in hot tub systems with Balboa 52163 D3000R2(x) circuit boards.

Unsure of what something on this page means?

Please contact us so we can better assist you.


  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: 52163
  • Part Number: D3000R2(x)
  • Item Number: 22-5882


Be the first to write a review.  Write a Review.