Customer Service
1-828-781-1903


Cal Spa 55739 Circuit Board, CS6200DVR1(x)

  • Part Number: 55739
  • Chip Number: CS6200DVR1(x)
  • Manufactured by: Cal Spa

$372.53

Add to Cart:

Item Number: 22-6400

Click For All Replacements

  • Description
  • Details
  • Reviews
Please read entire page before placing an order.

This is an OEM circuit board replacement for replacing Cal Spa 55739 circuit boards having a CS6200DVR1(x) chip number.
Tip: (x) = the last letter of your chip number.
Cross Reference Verification
Step 1 of 2:
Make sure your circuit board's serial number is in this list.
Tip: The circuit board's serial number is on a sticker on the circuit board (this is not the box's number).
Tip: Only the first five digits are need to verify the serial number.
Tip: Sometimes the serial number is shown as P/N (part number).
Tip: The image above shows an example of a serial number sticker.

Serial Numbers:
  • 55739
  • BAL55739
Step 2 of 2:
Make sure your circuit board's chip number is in this list.
Tip: The whole chip number is on a sticker located on the circuit board.
Tip: This is a different sticker than the serial number sticker.
Tip: The image above shows an example of a chip number sticker.

Chip Numbers:
  • CS6200DVR1A
  • CS6200DVR1B
  • CS6200DV
  • CS6200DVR1
  • CS6200DVR1(x)
Additional Cross Ref., Compatibility & Installation
Installation instructions:
(No soldering needed.)
(Failure to follow these instructions may lead to damage of your new replacement circuit board and other system peripherals.)

Make sure all white wires on the new replacement circuit board are in the same locations as the old board resepectively.
To clarify, if a wire on the new replacement circuit board is not plugged into the same place as it is on the old circuit board then move the wire on the new replacement circuit board to the same location as where it is on the old circuit board.
If the new replacement circuit board has a wire that is not on your old circuit board then disregard it.
Do not add any wires to the new replacement circuit board.

Make sure all Dip Switches on the new replacement circuit board are in the "OFF" position - UNLESS - your system wiring diagram indicates otherwise.
(Wiring diagram is found on the inside cover of the control box your circuit board mounts in.)
To clarify, confirm with your system wiring diagram the Dip Switch settings indicated there and set the new replacement circuit board's Dip Switches the same way.
Usually these switches are all in the "OFF" position, however, it is very imporant to make sure and set them according to your systems's wiring diagram Dip Switch settings.
Other Replacement Options
For all cross reference replacements of this circuit board:

Click Here

Or contact us if you need help finding or selecting parts.
Control System Box Serial Numbers
This is not required for cross reference verification.

This circuit board is found in the following hot tub control system boxes (but not limited to).

Control System Box Serial Numbers:;
  • 55738
  • VS5-CS6200DV-CDAH
  • VS501DVH

  • Part Number: 55739
  • Chip Number: CS6200DVR1(x)

  • Manufactured by: Cal Spa
  • Item Number: 22-6400


Be the first to write a review.  Write a Review.