T
o
p


Balboa 51387 Circuit Board H100R1(x) Alt Rplc, (Std Panel), Hawkeye

Balboa 51387 Circuit Board H100R1(x) Alt Rplc, (Std Panel), Hawkeye
Balboa 51387 Circuit Board H100R1(x) Alt Rplc, (Std Panel), Hawkeye
Balboa 51387 Circuit Board H100R1(x) Alt Rplc, (Std Panel), Hawkeye
Balboa 51387 Circuit Board H100R1(x) Alt Rplc, (Std Panel), Hawkeye

  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: 51387
  • Chip Number: H100R1(x)

$556.43



Item Number: 22-9432-B

  • Description
  • Details
  • Reviews
Please read entire page before placing an order.

For a money saving option, give us a call and ask about getting your circuit board repaired.

This money saving alternate replacement circuit board is for replacing Balboa 51387 circuit boards having a H100R1(x) chip number.

The Balboa 51387 H100R1(x) circuit boards are also found in hot tubs made by Hawkeye Spas and possibly others.

Tip: The "(x)" shown above is shorthand for a range of last letters on H100R1 chip numbers this alternate replacement circuit board can replace.

Please note: A list of chip numbers this alternate replacement circuit board can replace is specified in the CROSS REFERENCE VERIFICATION section below.

Please note: This alternate replacement circuit board is made by the same manufacturer, it is brand new, it is compatible with your system (unless specified otherwise in the ADDITIONAL CROSS REF., COMPATIBILITY & INSTALLATION section below), it has the same quality and durability.

Please note: This alternate repalcement circuit board will have different numbers.
Cross Reference Verification
Step 1 of 2:
Tip: Locate the serial number on the old circuit board being replaced.
Tip: The serial number is on a sticker on the old circuit board (not the box).
Tip: The serial number is shown on the sticker preceded by S/N or P/N (part number).
Tip: The image above shows an example of a serial number sticker (click image to enlarge it).

Verify the serial number on the old circuit board being replaced is in this list.

Serial Numbers:
  • 51387
  • BAL51387

Step 2 of 2:
Tip: Locate the chip number on the circuit board you are replacing.
Tip: The whole chip number is on a sticker located on the circuit board (not the box).
Tip: This is a different sticker than the serial number sticker.
Tip: The chip number sticker usually has two lines of text and the top line is the whole chip number (the bottom line is not needed).
Tip: See image above for an example of a chip number sticker and where they're typically found on the circuit board (click the image to enlarge it).

Verify the chip number on the circuit board being replaced placed is in this list.

Chip Numbers:
  • H100R1A
  • H100R1B
  • H100R1C
  • H100R1D
  • H100R1E
  • H100R1F
Additional Cross Ref., Compatibility & Installation
This package deal includes an alternate replacement circuit board and a compatible Standard topside control panel.
The old (original) topside control panel is outdated and not compatible.

ATTENTION: Verify the old topside control panel has 7 buttons or less.
If the old topside control panel has 8 buttons, see Related Products below for a package deal with an 8 button Deluxe topside control panel.

Note: 7 button (Standard) topside control panels and 8 button Deluxe topside control panels are not interchangable and are not upgradable to one another.

Make sure this new 7 button Standard topside control panel will fit.
Topside control panel size: 7-1/4" x 3-1/8"

Please note: The new control panel has a button labeled "Aux" and it's for a jet pump or an air blower or an auxilary device.

ATTENTION: Some of these hot tub systems have an optional auxiliary topside control panel that is also outdated and not compatible with this alternate replacement circuit board.
If you have an optional auxiliary topside control panel, please contact us to inquire if a compatible one is available.
Tip: When replacing a hot tub circuit board, testing the heater and replacing it (if bad), is recommended before installing or applying voltage on a new circuit board.
Note: A continuity test is not a sufficient heater test. Contact us by phone for more details on testing a heater.

Tip: Burned circuit boards or burned heater relays are often due to a loose electrical connection or a bad heater or both.
If all connections are tight and if the heater is good then the heater relays are probably old and worn out.
If a burned relay was powering a pump and all electrical connections are tight then the relay is probably old and worn out or the pump might be bad or going bad or all three.
Replacing the heater and/or pump with a new one is recommended if any of those scenarios apply.

Tip: See RELATED PRODUCTS below for more Balboa 51387 H100R1(x) replacement options.

Unsure of what something on this page means?

Please contact us so we can better assist you.


  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: 51387
  • Part Number: H100R1(x)
  • Item Number: 22-9432-B


Be the first to write a review.  Write a Review.