Balboa 53083 Circuit Board Alt Replacement

Cross Reference Verification

Serial Numbers:

• 53083
• BAL53083

Additional Cross Ref., Compatibility & Installation

The original topside control panel is outdated and not compatible with this alternate replacement circuit board.
This package deal includes an alternate replacement circuit board and a compatible topside control panel.
The old (original) topside control panel is outdated and not compatible.

ATTENTION: Some of these hot tub systems have an optional auxiliary topside control panel that is also outdated and not compatible with this alternate replacement circuit board.
If you have an optional auxiliary topside control panel, please contact us to inquire if a compatible one is available.

Tip: When replacing a hot tub circuit board, testing the heater and replacing it (if bad), is recommended before installing or applying voltage on a new circuit board.
Note: A continuity test is not a sufficient heater test. Contact us by phone for more details on testing a heater.

Tip: Burned circuit boards or burned heater relays are often due to a loose electrical connection or a bad heater or both.
If all connections are tight and if the heater is good then the heater relays are probably old and worn out.
If a burned relay was powering a pump and all electrical connections are tight then the relay is probably old and worn out or the pump might be bad or going bad or all three.
Replacing the heater and/or pump with a new one is recommended if any of those scenarios apply.

Unsure of what something on this page means?

Please contact us so we can better assist you.