T
o
p


Balboa 51091 Circuit Board 200R1(x) Alt Repl, Coleman Spas 100-987

Balboa 51091 Circuit Board 200R1(x) Alt Repl, Coleman Spas 100-987
Balboa 51091 Circuit Board 200R1(x) Alt Repl, Coleman Spas 100-987
Balboa 51091 Circuit Board 200R1(x) Alt Repl, Coleman Spas 100-987
Balboa 51091 Circuit Board 200R1(x) Alt Repl, Coleman Spas 100-987

  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: 51091
  • Chip Number: 200R1(x)

 Sold Out 
Item Number: 22-5820

  • Description
  • Details
  • Reviews

The Balboa 51091 200R1(x) circuit board is discontinued but we have options.

Option 1: Scroll down to RELATED PRODUCTS for other replacement options.

Option 2: Get your circuit board repaired.  Please contact us before sending items in for repair.

Option 3: Contact us to inquire about a new retro-fit system control box replacement.

The Balboa 51091 200R1(x) circuit boards are also found in hot tubs made by Coleman Spas under the part numbers 100-987, 100987.
Cross Reference Verification
Serial Numbers:
  • 51091
  • BAL51091

Chip Numbers:
  • 200R1A
  • 200R1B
  • 200R1C
  • 200R1D
  • 200R1E
  • 200R1F
Additional Cross Ref., Compatibility & Installation
This package deal includes an alternate replacement circuit board and a compatible topside control panel.
The old (original) topside control panel is outdated and not compatible.

ATTENTION: Some of these hot tub systems have an optional auxiliary topside control panel that is also outdated and not compatible with this alternate replacement circuit board.
If you have an optional auxiliary topside control panel, please contact us to inquire if a compatible one is available.

This replacement only supports a single speed air blower.
Tip: an air blower is not a jet pump.
Jet pumps are fully supported.
If you have an air blower with more than one speed, you will need to choose a speed and disconnect the wires of the other speeds.
Tip: When replacing a hot tub circuit board, testing the heater and replacing it (if bad), is recommended before installing or applying voltage on a new circuit board.
Note: A continuity test is not a sufficient heater test. Contact us by phone for more details on testing a heater.

Tip: Burned circuit boards or burned heater relays are often due to a loose electrical connection or a bad heater or both.
If all connections are tight and if the heater is good then the heater relays are probably old and worn out.
If a burned relay was powering a pump and all electrical connections are tight then the relay is probably old and worn out or the pump might be bad or going bad or all three.
Replacing the heater and/or pump with a new one is recommended if any of those scenarios apply.

Tip: See RELATED PRODUCTS below for more Balboa 51091 200R1(x) replacement options.

Unsure of what something on this page means?

Please contact us so we can better assist you.


  • Manufactured by: Balboa Water Group, Inc.
  • Part Number: 51091
  • Part Number: 200R1(x)
  • Item Number: 22-5820


Be the first to write a review.  Write a Review.

Related Products

(Items shown here are sold separately.)